Amazfit GTR 3 Pro Smart Watch in Bangladesh

Premium Artistic Design | Ultra HD AMOLED Display

24H Easy Health Management | Powerful Zepp OS & App support | 12-day Battery Life

Main Features of Amazfit GTR 3 Pro Smart Watch

Thanks to the glass cover, the product has no obvious border on the front, bringing a “borderless” visual experience.. Always-on Display: When the screen is illuminated, it displays system content. When the screen is in standby mode, it displays the time. This function requires users to manually set “Always-on Display”.

To measure SpO2, please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. All-day monitoring of SpO₂ needs to be enabled on the watch or in the Zepp App. SpO, alerts are sent if the detected rate is too low compared to the preset value, which needs to be set in the Zepp App, at a minimum of 80%. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement.

To use this function, all-day heart rate monitoring must be enabled.The 24-hour heart rate monitoring feature requires the user to enable Auto Heart Rate Monitor in in the Zepp App, and the minimum value can be set to 1 minute. Abnormal heart rate alerts and the preset value need to be set in the Zepp App.The 24-hour stress level monitoring needs to be enabled on the watch or in the Zepp App. Alerts for high stress levels are based on the preset value, and prompts for the breathing exercise need to be enabled on the watch.

Sleep monitoring can record night sleep and naps that last more than 20 minutes. Any sleep period that starts or ends between 10pm-8am will be recorded as night sleep, and if you fall asleep within a 60-minute window at either side of your night sleep period, it will also be recorded as night sleep. Sleep recordings that start or end over 60 minutes outside your night sleep period, and that do not overlap the 10pm-8am timeslot at any point, will be recorded as a nap.

The battery life may vary according to the settings, operation conditions and other factors. So the actual result may differ from the laboratory data.
Typical usage scenario: Heart rate monitoring is always on and measures at 10-minute intervals, sleep monitoring enabled; 200 pushed messages a day; raise wrist to see watch time 100 times; Bluetooth calls for 15 minutes and music playback for 30 minutes per week; test blood-oxygen 5 times per day; bright screen operations for 5 minutes; exercise 3 times a week for 30 minutes at a time, GPS running for 30 minutes; voice assistant turned off.
Battery Saver Mode: Engage the Battery Saver Mode on the watch, which turns off the Bluetooth connection, heart rate and other functions, and only records steps and basic sleep information.

Heavy usage scenario: Heart rate monitoring is always on and measures at 1-minute intervals, sleep monitoring and sleep breathing quality monitoring and stress monitoring enabled; 150 pushed messages a day lighting up the screen display; raise wrist to see watch time 100 times; Bluetooth calls for 60 minutes and music playback for 60 minutes per week; test blood-oxygen 5 times per day; offline voice assistant turned on; bright screen operations 15 minutes; exercise 3 times a week, GPS running for 30 minutes; voice assistant turned on.
GPS continuous usage time of 35 hours: Turn on heart rate monitoring and GPS, use the GPS to map your workouts.

The accuracy and sensitivity of the workout recognition feature varies from person to person, and are related to the posture and proficiency of the user during their workout. Short workout duration or frequent changes in posture may not trigger the automatic recognition feature. When you are driving a car or taking a bus, or taking part in other such activities, accidental recognition may be triggered if these activities are particularly similar to the selected workout mode. When you are conducting outdoor activities, if the GPS signal is poor or the AGPS data information has not been synchronized with the mobile phone for an extended period, these outdoor activities may be assessed as indoor activities.

The built-in sensor of the watch measures the real-time temperature of the contact area. In order to obtain a more accurate temperature value, please allow the watch to continue measuring the contact area for more than 15 minutes. Place the watch in the air to measure the current ambient temperature, or wear the watch on the wrist to measure the wrist-skin temperature. The wrist-skin temperature is easily affected by external conditions such as the environment and is different from body temperature. The measurement results are for reference only, not for medical purposes; wrist-skin and the environment temperature cannot be measured at the same time, only separately.

Swimming Stroke Recognition includes: Freestyle, Breaststroke, Butterfly-stroke, Backstroke, and Medley.

Indoor positioning services are not supported. Positioning speed and accuracy may be affected by the surrounding environment. Virtual Pacer is only compatible with Outdoor Running and Treadmill sports modes.The Amazfit GTR 3 Pro achieves a rating of 5 ATM, for a water-resistance of up to 50 meters, and is therefore suitable for splashes, snow, showering, or swimming. It has passed third-party testing conducted by SGS. Remove the watch when taking a hot shower or trip to the sauna, since too much steam can affect the seal and make it less water-resistant in future. Do not wear the watch with a leather or metal strap when swimming – when preparing to swim, change to a fluoroelastomer strap or other suitable type.

Offline voice assistant only supports Chinese, English, Spanish and German voice commands.The maximum storage space for music is 2.3GB (due to the system space occupied, the actual space used by the user may be less than 2.3GB); based on 5-10MB per song, it can store up to 270-470 MP3 songs.

Wi-Fi can only be used for music transfer from your smartphone to the watch.

The user can switch on or off this feature through the watch or app. This product is not a medical device and cannot be used for medical purposes or as basis for diagnosis of any medical condition. Detection results are provided for reference only. Please consult professional medical institutions if you feel unwell. To process the one-tap measurement, please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement.

Technical Specification of Amazfit GTR 3 Pro Smart Watch

Design

Colors: Brown Leather, Infinite Black

Dimensions: 46x46x10.7mm

Weight: 32g (without strap)

Body Material: Aluminum alloy
Buttons: 2

Water-resistance Grade: 5 ATM

Display

Material: AMOLED

Size: 1.45″

Resolution: 480×480

PPI: 331

Touchscreen: Tempered glass

Battery

Battery Capacity: 450 mAh (typical value)
Charging Method: Magnetic charging base

Theoretical Charging Duration: Approx. 2 hours

Typical Usage Scenario Battery Life: Up to 12 days

Battery Saver Mode Battery Life: Up to 30 days

Heavy Usage Scenario Battery Life: Up to 6 days

GPS Continuous Usage Scenario Battery Life: Up to 35 hours
Sensors

Health:

BioTrackerTM3.0 PPG biometric sensor

(supports blood-oxygen, 6PD + 1LED)

Movement:

Acceleration sensor, Gyroscope sensor,

Geomagnetic sensor, Barometric altimeter,

Ambient light sensor, Temperature sensor

Positioning:

Dual-band & 5 satellite positioning
Other

Microphone: Support

Speaker: Support

Motor: Linear motor

Classic Navigation Crown: Support

Supported Devices: Android 7.0 and above, iOS 12.0 and above

Connection: WLAN 2.4GHz21; Bluetooth 5.0

Application: Zepp App